How long is the flight from Washington to Knoxville | Flight time from DCA to TYS

This page answers the question how long is the flight from Washington to Knoxville. Time in the air or flight time is on average around 1 hour and 10 minutes when flying nonstop or direct without any connections or stopovers between Washington and Knoxville. The flight duration might vary depending on many factors such as flight path, airline, aircraft type, and headwinds or tailwinds. Flying time for such a commercial flight can sometimes be as short or shorter than 1 hour and 1 minutes or as long or longer than 1 hour and 54 minutes.

Need more info? Click on find flights

Gate to gate time for a flight is longer than the flying time due to the time needed to push back from the gate and taxi to the runway before takeoff, plus time taken after landing to taxi to the destination gate. The amount of time from when the airplane departs the Ronald Reagan Washington National Airport gate and arrives at the McGhee Tyson Airport gate is about 1 hour and 40 minutes.

The Washington DC airport code is DCA and the Knoxville TN airport code is TYS. The flight information shown above might be of interest to travelers asking how long does it take to fly from DCA to TYS, how long is the plane ride from Washington DC to Knoxville TN, and what is the flight time to Knoxville Tennessee from Washington Virginia.

How long was your flight? You can enter info here to help other travelers, or ask questions too.