How long is the flight from Washington to Johnstown | Flight time from IAD to JST

This page answers the question how long is the flight from Washington to Johnstown. Time in the air or flight time is on average around 33 minutes when flying nonstop or direct without any connections or stopovers between Washington and Johnstown. The flight duration might vary depending on many factors such as flight path, airline, aircraft type, and headwinds or tailwinds. Flying time for such a commercial flight can sometimes be as short or shorter than 32 minutes or as long or longer than 34 minutes.

Gate to gate time for a flight is longer than the flying time due to the time needed to push back from the gate and taxi to the runway before takeoff, plus time taken after landing to taxi to the destination gate. The amount of time from when the airplane departs the Washington Dulles International Airport gate and arrives at the John Murtha Johnstown Cambria County Airport gate is about 1 hour and 3 minutes.

The Washington DC airport code is IAD and the Johnstown PA airport code is JST. The flight information shown above might be of interest to travelers asking how long does it take to fly from IAD to JST, how long is the plane ride from Washington DC to Johnstown PA, and what is the flight time to Johnstown Pennsylvania from Washington Virginia.

How long was your flight? You can enter info here to help other travelers, or ask questions too.