How long is the flight from San Diego to Reno | Flight time from SAN to RNO

This page answers the question how long is the flight from San Diego to Reno. Time in the air or flight time is on average around 1 hour and 11 minutes when flying nonstop or direct without any connections or stopovers between San Diego and Reno. The flight duration might vary depending on many factors such as flight path, airline, aircraft type, and headwinds or tailwinds. Flying time for such a commercial flight can sometimes be as short or shorter than 1 hour and 6 minutes or as long or longer than 1 hour and 15 minutes.

Gate to gate time for a flight is longer than the flying time due to the time needed to push back from the gate and taxi to the runway before takeoff, plus time taken after landing to taxi to the destination gate. The amount of time from when the airplane departs the San Diego International Airport gate and arrives at the Reno Tahoe International Airport gate is about 1 hour and 41 minutes.

The San Diego CA airport code is SAN and the Reno NV airport code is RNO. The flight information shown above might be of interest to travelers asking how long does it take to fly from SAN to RNO, how long is the plane ride from San Diego CA to Reno NV, and what is the flight time to Reno Nevada from San Diego California.

How long was your flight? You can enter info here to help other travelers, or ask questions too.