How long is the flight from San Antonio to Columbus | Flight time from SAT to CSG

This page answers the question how long is the flight from San Antonio to Columbus. Time in the air or flight time is on average around 1 hour and 41 minutes when flying nonstop or direct without any connections or stopovers between San Antonio and Columbus. The flight duration might vary depending on many factors such as flight path, airline, aircraft type, and headwinds or tailwinds. Flying time for such a commercial flight can sometimes be as short or shorter than 1 hour and 22 minutes or as long or longer than 2 hours and 10 minutes.

Gate to gate time for a flight is longer than the flying time due to the time needed to push back from the gate and taxi to the runway before takeoff, plus time taken after landing to taxi to the destination gate. The amount of time from when the airplane departs the San Antonio International Airport gate and arrives at the Columbus Metropolitan Airport gate is about 2 hours and 11 minutes.

The San Antonio TX airport code is SAT and the Columbus GA airport code is CSG. The flight information shown above might be of interest to travelers asking how long does it take to fly from SAT to CSG, how long is the plane ride from San Antonio TX to Columbus GA, and what is the flight time to Columbus Georgia from San Antonio Texas.

How long was your flight? You can enter info here to help other travelers, or ask questions too.