This page answers the question how long is the flight from San Antonio to Bullhead City. Time in the air or flight time is on average around 2 hours and 21 minutes when flying nonstop or direct without any connections or stopovers between San Antonio and Bullhead City. The flight duration might vary depending on many factors such as flight path, airline, aircraft type, and headwinds or tailwinds. Flying time for such a commercial flight can sometimes be as short or shorter than 2 hours and 6 minutes or as long or longer than 2 hours and 34 minutes.
Gate to gate time for a flight is longer than the flying time due to the time needed to push back from the gate and taxi to the runway before takeoff, plus time taken after landing to taxi to the destination gate. The amount of time from when the airplane departs the San Antonio International Airport gate and arrives at the Laughlin Bullhead International Airport gate is about 2 hours and 51 minutes.
The San Antonio TX airport code is SAT and the Bullhead City AZ airport code is IFP. The flight information shown above might be of interest to travelers asking how long does it take to fly from SAT to IFP, how long is the plane ride from San Antonio TX to Bullhead City AZ, and what is the flight time to Bullhead City Arizona from San Antonio Texas.
How long was your flight? You can enter info here to help other travelers, or ask questions too.