How long is the flight from Minneapolis to Rapid City | Flight time from MSP to RAP

This page answers the question how long is the flight from Minneapolis to Rapid City. Time in the air or flight time is on average around 1 hour and 17 minutes when flying nonstop or direct without any connections or stopovers between Minneapolis and Rapid City. The flight duration might vary depending on many factors such as flight path, airline, aircraft type, and headwinds or tailwinds. Flying time for such a commercial flight can sometimes be as short or shorter than 1 hour and 4 minutes or as long or longer than 1 hour and 28 minutes.

Gate to gate time for a flight is longer than the flying time due to the time needed to push back from the gate and taxi to the runway before takeoff, plus time taken after landing to taxi to the destination gate. The amount of time from when the airplane departs the Minneapolis-St Paul International/Wold-Chamberlain Airport gate and arrives at the Rapid City Regional Airport gate is about 1 hour and 47 minutes.

The Minneapolis MN airport code is MSP and the Rapid City SD airport code is RAP. The flight information shown above might be of interest to travelers asking how long does it take to fly from MSP to RAP, how long is the plane ride from Minneapolis MN to Rapid City SD, and what is the flight time to Rapid City South Dakota from Minneapolis Minnesota.

How long was your flight? You can enter info here to help other travelers, or ask questions too.