How long is the flight from Minneapolis to Appleton | Flight time from MSP to ATW

This page answers the question how long is the flight from Minneapolis to Appleton. Time in the air or flight time is on average around 41 minutes when flying nonstop or direct without any connections or stopovers between Minneapolis and Appleton. The flight duration might vary depending on many factors such as flight path, airline, aircraft type, and headwinds or tailwinds. Flying time for such a commercial flight can sometimes be as short or shorter than 34 minutes or as long or longer than 1 hour and 19 minutes.

Gate to gate time for a flight is longer than the flying time due to the time needed to push back from the gate and taxi to the runway before takeoff, plus time taken after landing to taxi to the destination gate. The amount of time from when the airplane departs the Minneapolis-St Paul International/Wold-Chamberlain Airport gate and arrives at the Outagamie County Regional Airport gate is about 1 hour and 11 minutes.

The Minneapolis MN airport code is MSP and the Appleton WI airport code is ATW. The flight information shown above might be of interest to travelers asking how long does it take to fly from MSP to ATW, how long is the plane ride from Minneapolis MN to Appleton WI, and what is the flight time to Appleton Wisconsin from Minneapolis Minnesota.

How long was your flight? You can enter info here to help other travelers, or ask questions too.