How long is the flight from Dallas/Fort Worth to Richmond | Flight time from DFW to RIC

This page answers the question how long is the flight from Dallas/Fort Worth to Richmond. Time in the air or flight time is on average around 2 hours and 23 minutes when flying nonstop or direct without any connections or stopovers between Dallas/Fort Worth and Richmond. The flight duration might vary depending on many factors such as flight path, airline, aircraft type, and headwinds or tailwinds. Flying time for such a commercial flight can sometimes be as short or shorter than 2 hours and 11 minutes or as long or longer than 4 hours and 22 minutes.

Gate to gate time for a flight is longer than the flying time due to the time needed to push back from the gate and taxi to the runway before takeoff, plus time taken after landing to taxi to the destination gate. The amount of time from when the airplane departs the Dallas Fort Worth International Airport gate and arrives at the Richmond International Airport gate is about 2 hours and 53 minutes.

The Dallas/Fort Worth TX airport code is DFW and the Richmond VA airport code is RIC. The flight information shown above might be of interest to travelers asking how long does it take to fly from DFW to RIC, how long is the plane ride from Dallas/Fort Worth TX to Richmond VA, and what is the flight time to Richmond Virginia from Dallas/Fort Worth Texas.

How long was your flight? You can enter info here to help other travelers, or ask questions too.