ADVERTISEMENTS

How long is the flight from Cleveland to Baltimore | Flight time from CLE to BWI

This page answers the question how long is the flight from Cleveland to Baltimore. Time in the air or flight time is on average around 58 minutes when flying nonstop or direct without any connections or stopovers between Cleveland and Baltimore. The flight duration might vary depending on many factors such as flight path, airline, aircraft type, and headwinds or tailwinds. Flying time for such a commercial flight can sometimes be as short or shorter than 49 minutes or as long or longer than 2 hours and 31 minutes.

Gate to gate time for a flight is longer than the flying time due to the time needed to push back from the gate and taxi to the runway before takeoff, plus time taken after landing to taxi to the destination gate. The amount of time from when the airplane departs the Cleveland Hopkins International Airport gate and arrives at the Baltimore/Washington International Thurgood Marshal Airport gate is about 1 hour and 28 minutes.

The Cleveland OH airport code is CLE and the Baltimore MD airport code is BWI. The flight information shown above might be of interest to travelers asking how long does it take to fly from CLE to BWI, how long is the plane ride from Cleveland OH to Baltimore MD, and what is the flight time to Baltimore Maryland from Cleveland Ohio.

How long was your flight? You can enter info here to help other travelers, or ask questions too.