How long is the flight from Bullhead City to San Antonio | Flight time from IFP to SAT

This page answers the question how long is the flight from Bullhead City to San Antonio. Time in the air or flight time is on average around 2 hours and 2 minutes when flying nonstop or direct without any connections or stopovers between Bullhead City and San Antonio. The flight duration might vary depending on many factors such as flight path, airline, aircraft type, and headwinds or tailwinds. Flying time for such a commercial flight can sometimes be as short or shorter than 1 hour and 57 minutes or as long or longer than 2 hours and 13 minutes.

Gate to gate time for a flight is longer than the flying time due to the time needed to push back from the gate and taxi to the runway before takeoff, plus time taken after landing to taxi to the destination gate. The amount of time from when the airplane departs the Laughlin Bullhead International Airport gate and arrives at the San Antonio International Airport gate is about 2 hours and 32 minutes.

The Bullhead City AZ airport code is IFP and the San Antonio TX airport code is SAT. The flight information shown above might be of interest to travelers asking how long does it take to fly from IFP to SAT, how long is the plane ride from Bullhead City AZ to San Antonio TX, and what is the flight time to San Antonio Texas from Bullhead City Arizona.

How long was your flight? You can enter info here to help other travelers, or ask questions too.