How long is the flight from Baltimore to San Diego | Flight time from BWI to SAN

This page answers the question how long is the flight from Baltimore to San Diego. Time in the air or flight time is on average around 5 hours and 14 minutes when flying nonstop or direct without any connections or stopovers between Baltimore and San Diego. The flight duration might vary depending on many factors such as flight path, airline, aircraft type, and headwinds or tailwinds. Flying time for such a commercial flight can sometimes be as short or shorter than 4 hours and 46 minutes or as long or longer than 5 hours and 39 minutes.

Gate to gate time for a flight is longer than the flying time due to the time needed to push back from the gate and taxi to the runway before takeoff, plus time taken after landing to taxi to the destination gate. The amount of time from when the airplane departs the Baltimore/Washington International Thurgood Marshal Airport gate and arrives at the San Diego International Airport gate is about 5 hours and 44 minutes.

The Baltimore MD airport code is BWI and the San Diego CA airport code is SAN. The flight information shown above might be of interest to travelers asking how long does it take to fly from BWI to SAN, how long is the plane ride from Baltimore MD to San Diego CA, and what is the flight time to San Diego California from Baltimore Maryland.

How long was your flight? You can enter info here to help other travelers, or ask questions too.